Αποτελέσματα Αναζήτησης
The following sizes of metric DIN 912 hexagon socket head cap screws are available for immediate shipping from stock: Diameters ranging from M1.6 to M48, in coarse and fine thread in lengths up to 320mm, in steel and stainless steel A2 and A4. View parts by clicking on the following link: DIN 912 hexagon socket head cap screws.
AFT Fasteners provides a helpful resource on socket head cap screw dimensions including: fhcs dimensions and shcs dimensions, material, hardness, tensile strength, and yield strength.
Hexagon and Spline Socket Head Cap Screws shall be designated by the following data in the sequence shown: Nominal size (number, fractional or decimal equivalent); threads per inch; length (fractional or decimal equivalent); product name; material; and protective coating if required.
Metric socket head cap screws. DIN 912 BS 4168 ISO 4762. Materials and Finishes. Steel 12.9/Self colour Stainless steel/Self colour. All data is correct to the best of our knowledge, however TR cannot be held responsible for any errors or omissions. Dimensions.
Scope of the DIN standard. The DIN 912 standard specifies the tolerances and the variation in form of socket head cap screws, for sizes M1.4 up to and including M100. Mechanical properties for these items are defined in ISO 898, ISO 3506 and DIN 267. Table 1 below defines the overall dimensional tolerances of this screw type.
SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS (ANSI B 18.3-1982) The body of the screw is the unthreaded cylindrical portion of the shank where not threaded to the head; the shank being the portion of the screw from the point of juncture of the conical bearing surface and the body to the flat of the point. The length of thread LT is the
Dimensions of Hexagon Socket Head Cap Screws ASME B 18.3-2002 Nominal Size (Basic Product Diameter) D A H C J T G K Body Diameter Head Diameter Head Height Maximum Chamfer or Radius Nominal Hexagon Socket Size Minimum Key Engagement Minimum Wall Thickness Maximum Chamfer or Max. Min. Max. Min. Max. Min. Radius