Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

1. www.shotgunworld.com › threads › 20-gauge-powder-choices-for-3-4-oz-loads20 gauge powder choices for 3/4 oz loads - Shotgun Forum

   www.shotgunworld.com › threads › 20-gauge-powder-choices-for-3-4-oz-loads

   • Αποθηκευμένο αντίγραφο

   9 Απρ 2016 · As far as 20 ga 3/4 oz loads, you will be hard pressed to beat Green Dot or Hodgdon's International. These are great powders for 20 ga. 3/4 oz. loads, but should not be used in 7/8 oz loads except in limited applications.

2. www.trapshooters.com › threads › 3-4-oz-12ga-load3/4 oz 12ga load? | Trapshooters Forum

   www.trapshooters.com › threads › 3-4-oz-12ga-load

   • Αποθηκευμένο αντίγραφο

   6 Μαΐ 2017 · My best performing load after trying several different components is 8 1/2's @ 1325fps. I finally settled on Noble Sport Vectan A24 powder (18 grs.) with a cheddite and AA or Rem. hull and CB0175-12 wad. This load gives a good crimp and stack height. You will be surprised how effective this 3/4 oz. load is with some choke.

3. www.claybusterwads.com › images › loaddataCB0175-12 Reloading Data ~ ¾ Ounce Shot Loads - Claybuster Wads

   www.claybusterwads.com › images › loaddata

   CB0175-12 Reloading Data ~ ¾ Ounce Shot Loads Powder Grains Primer Velocity Pressure ¾ Extra-Lite 14.5 Win 209 1225 6900 ¾ Extra-Lite 15 Win 209 1260 7300 ¾ Extra-Lite 16 Win 209 1300 7600 ¾ Red Dot 15.2 Win 209 1200 5900 ... 3/4 oz. Titewad 17.8 Ched. 209 1300 10,000 PSI 3/4 oz. Titewad 15.5 Fed. 209A 1150 7900 PSI ...

4. thegunpsy.com › wp-content › uploads12 Gauge Reloading Data for Lead Shot - The Gun Psychiatrist

   thegunpsy.com › wp-content › uploads

   12 Απρ 2019 · Longshot 34.0 Fed. 209A One Fed. 12S3 One 20 ga. 1/4" felt under shot 1205 12,100 Blue Dot 40.0 Win. 209 One Win. WAA12SL 1162 9,500 Blue Dot 40.5 Win. 209 One Rem. TGT-12 1190 10,000 3.5" Winchester Plastic Cases - Plastic Basewad | Fold Crimp | 2 1/4 oz Powder Charge (GR) Primer Wad Column Velocity (FPS) Pressure (PSI) 800X 31.0 Win. 209 One Win.

5. www.americantrapshooter.com › threads › 3-4-ounce-loads-reloading-data3/4 Ounce Loads Reloading Data - Americantrapshooter.com

   www.americantrapshooter.com › threads › 3-4-ounce-loads-reloading-data

   • Αποθηκευμένο αντίγραφο

   21 Δεκ 2017 · As a follow up I shot some 3/4 oz loads today I had loaded for a friend. Worked well for skeet, no problem with second shot in my over under. I was using AAHS hulls, W209 primer, 15.4 grains of Red Dot with the Claybuster wads for 3/4 oz.

6. shotgunreport.com › 2014/09/10 › 12-gauge-34-oz-loads12 Gauge 3/4 oz Loads | Shotgun Report®

   shotgunreport.com › 2014/09/10 › 12-gauge-34-oz-loads

   10 Σεπ 2014 · Hodgdon lists some 3/4 oz loads for Remington and Winchester hulls using Clays powder and Federal 12SO wads. 1200, 1250 and 1300 fps loads are listed. You can get the loading recipes at Hodgdon . I don’t see any 3/4 oz 12 gauge loads listed on the Alliant Powder site.

7. www.duckhuntingchat.com › threads › 20-ga-tss-waterfowl-patterns20 ga TSS waterfowl patterns | Duck Hunting Forum

   www.duckhuntingchat.com › threads › 20-ga-tss-waterfowl-patterns

   • Αποθηκευμένο αντίγραφο

   6 Σεπ 2018 · For a 20 ga shooting ducks with TSS shot I think I would go with a 3/4 oz load. With 3/4 oz of TSS #8 shot you will have right at 188 pellets per shell. The TSS #7 shot with 3/4 oz will have right at 137 pellets per shell.