Αποτελέσματα Αναζήτησης
14 Φεβ 2020 · Trunks are required to pass VLAN information between switches. A port on a switch is either an access port or a trunk port. Access ports carry traffic from a specific VLAN assigned to the port. A trunk port by default is a member of all VLANs. Therefore, it carries traffic for all VLANs.
26 Ιουλ 2020 · Switching, Routing and Wireless Essentials v7.0 SRWE - 3.4.5 Packet Tracer - Configure Trunks .pka file: https://drive.google.com/file/d/1FRAw...
3 Μαρ 2012 · This video walks through completing Packet Tracer 3.4.5 - Configure Trunks. This is part of the Switching, Routing, and Wireless Essentials version 7 Cisco Networking Academy curriculum....
30 Απρ 2020 · 3.4.5 Packet Tracer - Configure TrunksVisit our Website: http://www.techacadhelp.comFollow us on Facebook: https://www.facebook.com/techacad4u
14 Φεβ 2020 · To ease some of the VLAN and trunking configurations, trunk negotiation between network devices is managed by the Dynamic Trunking Protocol (DTP), and is automatically enabled on Catalyst 2960 and Catalyst 3650 switches. In this activity, you will configure trunk links between the switches.
In this Packet Tracer Physical Mode (PTPM) activity, you will create VLANs on both switches in the topology, assign VLANs to switch access ports, and verify that VLANs are working as expected.
Access ports carry traffic from a specific VLAN assigned to the port. A trunk port by default is a member of all VLANs; therefore, it carries traffic for all VLANs. This activity focuses on creating trunk ports, and assigning them to a native VLAN other than the default. Part 1: Verify VLANs.
