Αποτελέσματα Αναζήτησης
29 Σεπ 2020 · Part 1: Build the Network and Configure Basic Device Settings. Part 2: Create VLANs and Assign Switch Ports. Part 3: Configure an 802.1Q Trunk between the Switches. Background / Scenario. Modern switches use virtual local-area networks (VLANs) to improve network performance by separating large Layer 2 broadcast domains into smaller ones.
11 Μαΐ 2020 · 3.6.2 Lab - Implement VLANs and TrunkingCCNAv7: Switching, Routing, and Wireless EssentialsVisit our Website to contact us: http://www.techacadhelp.comFollow...
7 Μαΐ 2020 · Switching, Routing and Wireless Essentials v7.0 SRWE - 3.6.2 Lab - Implement VLANs and Trunking.docx file: https://drive.google.com/file/d/1Cr53CAFaZz4_IbOR4...
15 Σεπ 2023 · Lab 3 - 3.6.2 Lab - Implement VLANs and Trunking CCNAv7 SRWE
In this lab, you will create VLANs on both switches in the topology, assign VLANs to switch access ports, verify that VLANs are working as expected and create VLAN trunks between the two switches. Note: The switches used with CCNA hands-on labs are Cisco Catalyst 2960s with Cisco IOS Release 15(2)
14 Φεβ 2020 · Part 1: Configure VLANs; Part 2: Assign Ports to VLANs; Part 3: Configure Static Trunking; Part 4: Configure Dynamic Trunking; Background. You are working in a company that is getting ready to deploy a set of new 2960 switches in a branch office. You are working in the lab to test out the VLAN and trunking configurations that are planned.
11 Ιουλ 2022 · Part 1: Build the Network and Configure Basic Device Settings. Part 2: Create VLANs and Assign Switch Ports. Part 3: Maintain VLAN Port Assignments and the VLAN Database. Part 4: Configure an 802.1Q Trunk Between the Switches. Part 5: Delete the VLAN Database. Reflection. Device Configs – Final.
