Αποτελέσματα Αναζήτησης
PRINT SETTINGS & TIPS FOR PIPs: Get your settings started by using any info from the manufacture of your resin (Here's Elegoo's resin settings). This will contain most of your print settings for any specific resin.
Caution: Please make sure whether this firmware matches your printer, wrong update across different printers may turn it unusable. If you run into any problems with the firmware please contact our support team at 3dp@elegoo.com , we will try our best to help.
I was printing using the standard settings that came with the chitubox, then i changed it tk the install recommended and now im getting failures. I now wish to try printing at 0.025 on the mars pro 2. Can anyone recommend the best settings. Model is only aprox 1x1x1cm. Thanks.
I really recommend you calibrate your printer to find the optimal settings. There are many different test you can do, like the validation matrix (https://3dprinterly.com/how-to-calibrate-resin-3d-prints-testing-for-resin-exposure/) just to name one.
ELEGOO Mars 2 & Mars 2 Pro resin settings spreadsheet - Updated 2022. Below you can find a list of resins which are compatible with the ELEGOO Mars 2 & Mars 2 Pro. These are open material 3D printers, meaning they can print with any brand of resin, not just the ones made by ELEGOO.
The Elegoo Mars 2 Pro and Elegoo Mars 2 LCD / MSLA 3D printers are open printers with a 405 nm light source, compatible with third-party resins. The following settings are validated for Garreco Print resin. Contact us if you have any questions or need support.
ELEGOO MARS 2 - Powerresins. ⚠ Please note that the profile settings provided here are average settings. Successful printing depends on factors such as the operating hours of the light source, environmental conditions, and the condition of the resin vat. Please read this article for fine-tuning.
