Αποτελέσματα Αναζήτησης
Elegoo Mars Not Printing Anything. If your Elegoo Mars isn’t printing anything at all, you very likely have an exposure issue. However, failure to print may be related to several other issues such as resin quality or availability. How To Fix. Check the resin in the tank. If it’s low, the access points are blocked, or the resin is very low ...
Yesterday I tried resuming printing, but it seems that nothing is sticking to the plate anymore. At first I thought it was the model I choose this time, but I tried printing the Elegoo rook and that failed as well, since then I have tried:
I recently bought a Elegoo Mars Pro and it is not printing at all. Here are all the steps I have taken. 1. Removed Elegoo Mars and set it up. I have seen some individuals on youtube that had a film on the bottom of their resin basin. Mine did not have any film to remove off of the resin basin. There was no sticker or tag saying to remove the ...
25 Νοε 2020 · If the printing fails, please do not start your next print immediately. 1. First use our plastic scraper tool (as shown in the picture) to gently clean the impurities in the tank in time, otherwise it will cause further damages to your printer.
Got the 3 Pro and it’s having the same problem. Everything seems to work but nothing prints. Updated firmware, tested LCD, changed settings in Chitubox to reflect the new machine, all seem to be fine.
I stirred the resin gently with a soft paintbrush, then I cleaned the build plate with IPA, let it dry thoroughly, levelled it again to be sure, and tried a new print. It lowers the build plate into the resin and will not print. It sits at 1%, never updates the estimated build time, and that's it.
6 Ιουν 2020 · While printing, there are vibrations and such, so if the cable was just barely hanging on, this easily could shake it loose. "White" is when the screen is transparent, letting all of the light from behind through it.
