Αποτελέσματα Αναζήτησης
27 Δεκ 2021 · Description: Operating and maintenance manual. Environment: Forma Model 3100, 3200 Series, models: 3110 Series Single Chamber Water Jacket Incubator. 3210 Series Dual Chamber Water Jacket Incubator. *The models listed as dual chamber models are stacked or dual chamber units. These units arrive as single stand-alone units.
Description: Operating and maintenance manual. Environment: Forma Model 3100/3200 Series, models: 3110 Series Single Chamber Water Jacket Incubator. 3210 Series Dual Chamber Water Jacket Incubator. *The models listed as dual chamber models are stacked or dual chamber units. These units arrive as single stand-alone units.
27 Δεκ 2021 · Operating and maintenance manual. Environment: Forma Series II, Water Jacket CO2 Incubator, Model 3100 Series. Single chamber models: *TC is a thermal conductivity sensor. IR is an infrared sensor. **All units are 50-60 Hz. Attachment (s):
Calibrating T/C CO2 System. Models 3110, 3111, 3130 and 3131 have a thermal conductivity (T/C) CO2 sensor. Thermal conductivity of the incubator atmosphere is not only effected by the quantity of CO2 present, but also by the air temperature and the water vapor present in the incubator atmosphere.
Always use the proper protective equipment (clothing, gloves, goggles, etc.) Always dissipate extreme cold or heat and wear protective clothing. Always follow good hygiene practices.
Section 1 Installation and Start-Up Control Panel Operation The Model 3100 Series water jacket incubator has four basic modes, which allow incubator setup. The modes are as follows: Run, Setpoints, Calibration and System Configuration.
The shape mimics the plastic shell to create uniformity in the series. The seat area can optionally carry a seat pad composed of foam thickness of 10 mm and 30 kg/m 3 density, upholstered in the fabric chosen.
