Αποτελέσματα Αναζήτησης
4 Μαΐ 2023 · What is the 2,4-D Mix Ratio? The recommended mixing ratio for 2,4-D is 2.5 oz of herbicide to 1 gallon of water. Add five tablespoons of 2,4-D into a gallon of water and mix well before spraying onto broadleaf weeds to kill them.
Most cases of groundwater contamination involving phenoxy herbicides such as 2,4D have been associated with - mixing/loading and disposal sites. Caution should be exercised when handling 2,4-D pesticides at such sites to prevent contamination of groundwater supplies. Use of closed systems for mixing and transferring this pesticide will reduce the
Most 2,4-D concentrates require mixing 1–5 ounces of 2,4-D per gallon of water. Review manufacturer labeling and mixing instructions. 2,4-D concentrate is sold at different levels of potency by different manufacturers, so the ratio that is appropriate for one 2,4-D product may not be correct for another.
1 Μαρ 1997 · If you want to spray the small 12-acre field, the amount of 2,4-D added to the tank before bringing the volume up to 240 gallons would be: Gallons of 2,4-D = 12 acres × 0.375 gallon per acre = 4.5 gallon
Application rates should be 2 to 10 gallons of total spray by air or 5 to 25 gallons by ground equipment unless otherwise direc ted. In either case, use the same amount of 2,4-D recommended per acre. For crop uses, do not mix with oil, surfactants, or other adjuvants unless specifically recom-mended.
For example, 2,4-D mixing ratio for small areas is: Use 3 to 4 fluid ounces (6 to 8 tablespoons) per 1,000 square feet. Mix 1 to 3 gallons of water and apply uniformly over the area when weeds are small and growing actively before the bud stage. The best time to apply is usually in the spring.
2,4-D/LV4 is intended for selective control of many broadleaf weeds in certain crops, including, cereal grains (wheat, barley, millet, oats and rye), corn (field corn, popcorn and sweet corn), fallow land and crop stubble, sorghum (grain and forage sorghum), and soybeans (preplant burndown application only),
