Αποτελέσματα Αναζήτησης
Using the KL2791 single-phase AC motor terminal, a single-phase AC motor with a maximum power consumption of 0.1 kW can be operated with speed control depending on the process data. L1 and N of the motor are wired directly to the terminal;
1.1 MOUNTING INSTRUCTIONS – See Section 5, on page 14. 1.2 AC LINE INPUT CONNECTION – Connect the single-phase AC line input to Terminal Block TB1 (Terminals “L1”, “L2”), as shown in Figure 1. See Section 6.1, on pages 14 and 15. Application Note – Do not connect this drive to a GFCI.
Catalog No. 600-TAX9 Catalog No. 600-TAX293. For use with automatic pilot devices such as Two speed manual motor starter is designed for thermostats, and float switches. A selector switch starting and protecting small, single phase, two- is mounted in the same enclosure to allow speed AC fan motors.
Wiring diagrams, sometimes called “main” or “construc-tion” diagrams, show the actual connection points for the wires to the components and terminals of the controller. They show the relative location of the components. They can be used as a guide when wiring the controller.
This NHP Motor Control Handbook 2018 provides technical information of a general nature about low voltage switchgear, protective devices and their combination.
The MSC-1 is a speed controller for controlling the speed of AC speed control motors and combines high performance and value with a space saving, easy to use design.
The AVA3.0 is a stepless speed controller for single phase AC external rotor motors. Rated at 240V, 3 Amp, suitable for 50/60 Hz 600VA up to 55°C. The AVA3.0 controller will vary the speed of 240V AC single phase fan motors in response to DC input signals such as 2 to 20 milliamps or 0 to 10 volts.
