Αποτελέσματα Αναζήτησης
The first step in sizing your phase converter is to make sure you actually have enough single-phase power coming in. The formula goes as follows: 3-phase amps x 1.6 x 1.2 (20% above of what your load is) = Required single phase amps with 20% (most cities require) 2. Load type. The next step is to understand what kind of load you have:
17 Ιουν 2016 · I would strongly suggest you get a 3 phase load center as a sub panel off your main panel. Wire L1 and L2 to top of this load center. leave "wild" leg L3 not connected. Put your converter on a breaker off this panel, double check but looks to need a 100 amp breaker.
19 Αυγ 2024 · The 3HP phase converter is a meticulously engineered workhorse, built with robust housing and high-quality components. This translates to dependable power conversion and continuous operation, minimizing downtime and keeping your business running smoothly.
There are phase converters set up light-duty loads, CNC, resistive, and hard starting loads. Each load runs differently and has different starting loads. Going over the type of machine will help determine which phase converter will work best.
25 Σεπ 2012 · Phase converters are ok for an occasional small load or out in middle of nowhere where miles of line need run to be able to get three phase. Even an open delta supply is preferred to phase converters especially for motors as large as 15-20 HP or more.
The largest phase converter that can be run with the 145 A available is a PT020, a 20-horsepower rated unit, with a max amp draw if 111 A. The PT030, a 30-horsepower rated unit, requires 165 A of single-phase.
Cedarberg Rotary Phase Converters are designed to start any motor from fractional horsepower up to the nameplate rating. If the motor on the equipment is larger than the phase converter’s nameplate rating, a phase converter of the correct size will need to be purchased.
