Αποτελέσματα Αναζήτησης
seat cushion / head rest. Your Graco booster seat can be used with or without the back support (on certain models) as long as the above requirements are met. 2 2
head support into slots on the back support as shown. Head support will click into the back support. You may need to unfasten the hook and loop attachment tape on both sides at the top of the back support to allow for easier access to the slots. Always use child restraint with head support installed and properly adjusted. CLICK!
If tops of ears are above top of seat, your child is too large for the booster seat. Without back support, when sitting on the booster seat, your child’s ears are below the top of the vehicle seat cushion / head rest. Page 18: Vehicle Seat Location Requirements SERIOUS INJURY OR DEATH.
Head Support Fabric Flip seat over and insert the fabric from the head support underneath the fabric on the lower back support as shown. Page 9 Make sure that no part of the seat covering interferes when attaching backrest to the base.
booster seat. • Without back support, when sitting on the booster seat, your child’s ears are below the top of the vehicle seat cushion / head rest. Your Graco booster seat can be used with or without the back support (on certain models) as long as the requirements on page 10 are met.
INSTRUCTION MANUAL. This booster seat is designed for use by children who meet the following requirements: Weight: 30 - 100 pounds (13.6 - 45 kg) Height: 34 - 57 inches (86.4 - 144.8 cm) READ THIS MANUAL. Do not install or use this booster seat until you read and understand the instructions in this manual.
Curved bottom of head support allows for head support to be pulled down to fit smaller infants. Body Support Use only in the rear-facing mode. Body support must be used if shoulders are below the lowest harness setting.
