Αποτελέσματα Αναζήτησης
PURPOSE: Provide specifications and instructions for adjustment of CMI fuel injection systems. COMPLIANCE: At Engine Installation, 100 hour/Annual Inspection, fuel system component replacement or as required if operation is not within specifications.
PURPOSE: Provide specifications and instructions for adjustment of Continental Motors (CM) fuel injection systems. COMPLIANCE At engine installation, 100 hour/Annual Inspection, fuel system component replacement or as required if operation is not within specifications. MODELS AFFECTED:
CONTINUOUS FLOW FUEL INJECTION SYSTEMS. PURPOSE: Provide procedures and specifications for the adjustment of Teledyne Continental Motors (TCM) fuel injection systems. COMPLIANCE: At Engine Installation, 100 hour/Annual Inspection, fuel system component replacement or as required if operation is not within specifications. MODELS
The relevant sections of Continental Publication M-0 are 6-4.7.4, Fuel System Operational Check, and 6-4.10.2, Fuel System Adjustment. Section 6-4.7.4 describes the procedure to measure the appropriate fuel injection system parameters and 6-4.10.2 describes how to make adjustments (if required).
Designed specifically for auto and truck fuel injection systems. Continental SAE J30R9 is CARB approved (Q-10-004) with a maximum fuel permeation of 15g/m2/day at 104°F (40°C) and certified to EPA EVTIPLINE110–001.
Manual. The Standard Practice Maintenance Manual applies to all horizontally opposed, spark-ignited aircraft engines operating on AvGas fuel. The content of M-0 is supplemental to the existing Instructions for Continued Airworthiness (ICA) for Continental Motors’ engines listed in Section II, “Applicability”. M-0 contains
PURPOSE: Provide procedures and specifications for the adjustment of Teledyne Continental Motors (TCM) fuel injection systems. MODELS AFFECTED: At Engine Installation, 100 hour/Annual Inspection, fuel system component replacement or as required if operation is not within specifications.
