Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. 10 Οκτ 2024 · If you receive an error message or blank white screen when launching Design Space for Desktop it may be due to an outdated version of Design Space or third-party software interference. Use the information in this article to troubleshoot the issue: Design Space for Desktop: Error Starting Application.

  2. 23 Δεκ 2022 · The codes are for the icemaker condensor. The condensor, which pumps the refrigerant and circulates it through the icemaker appears to have failed. Without that, it won't make ice. If the refrigerator and freezer still work you can get ice trays (like you had in the old days), fill them with water, and put them in the freezer to make ice cubes.

  3. 7 Ιουλ 2023 · Your Samsung ice maker won’t make ice if it’s turned off. Once you turn it on, you must wait at least 24 hours for it to produce enough ice to dispense. Besides that, check that your fridge has a continuous water supply at the correct pressure levels to supply your ice maker.

  4. If your Samsung refrigerator's ice maker has stopped working without warning, it may just need a reset. Follow this guide to start making ice again. Author: Bill Gilbert (and one other contributor)

  5. To reset your ice maker: Remove your ice bucket so you can get to your ice maker. Locate the test button. It's a rectangular button near the front of the ice maker, on the side or bottom. There may be writing that says TEST or an arrow pointing at it.

  6. 17 Σεπ 2024 · Make sure your ice maker is turned on at both the panel and the ice maker on/off switch. Also, check to make sure the door switch isn't malfunctioning. Make sure your freezer temperature is set to 0 degrees. Make sure the fill tube, ice mold, or ice dispenser isn't clogged or there aren't any frozen mechanical parts.

  7. If the error code 2 or 14E shows on the display of the unit, it means the ice makers sensor has an error. To fix it, simply replace the sensor which is usually inside the ice maker. Remove the ice maker from its compartment and take the sensor bracket out to reveal the sensor.