Αποτελέσματα Αναζήτησης
According to the Water Quality Association, the hardness scale, measured in gpg of calcium carbonate, can be represented as follows: Less than 1 gpg is considered soft Between 1 and 3.5 gpg is considered slightly hard
The majority of findings are delivered as a number that reports the concentration of calcium carbonate or other equivalents for a given unit of water. The water hardness scale result may be expressed in parts per million (ppm), grains per gallon (gpg), or milligrams per liter (mg/L).
The Culligan HE Municipal Water Softeners are tested and certified by WQA against NSF/ANSI Standard 372, CSA B483.1, and NSF/ANSI Standard 44 for the effective reduction of hardness (calcium and magnesium), and NSF/ANSI Standard 42 for the effective reduction of Chlorine Taste and Odor, as verified and substantiated by test data. The Culligan ...
The internationally recognized water hardness scale recognizes 4 water hardness classes; from soft, moderately hard, hard, to very hard. By definition, water hardness is the total sum of molar concentrations of calcium ions (Ca 2+) and magnesium ions (Mg 2+).
The level of hardness is measured in grains per gallon (gpg) or milligrams per liter (mg/L). Water that registers between 0-1 gpg is considered soft; moderately hard water reads at 3.5-7 gpg; and any water with gpg over 7 is classified hard to very hard.
The Culligan Medallist Series Water Softeners are tested and validated by WQA and certified by UL against ANSI/NSF Standard 44 for the effective reduction of calcium and magnesium (hardness) along with Barium and Radium 226/228*.
31 Μαΐ 2022 · Your water softener hardness setting should be based on your water supplies water hardness level and its iron concentration, for example a water hardness level of 25 grains per gallon (gpg) and 0.3 parts per million (ppm) of iron would result in a water softener hardness setting of 27.
