Αποτελέσματα Αναζήτησης
11 Αυγ 2011 · A displacement in the y-axis (transverse - sway), is the same result as x-axis. A displacement in the z-axis (vertically - heave) is different, as there shall be a restoring force, buoyancy, once a displacement occurs.
The longitudinal/X axis, or roll axis, is an imaginary line running horizontally through the length of the ship, through its centre of mass, and parallel to the waterline. A roll motion is a side-to-side or port-starboard tilting motion of the superstructure around this axis.
9 Σεπ 2019 · A ship has available to it motion in three axes. Motion on the “X” axis is roll, motion on the “Y” axis is pitch, and motion on the “Z axis is yaw. This diagram adds “surge,” and “heave,” but they are a bit beyond the scope of the question.
12 Μαρ 2019 · I have used satitek pro flight rudder pedals which has y-axis, x-axis and z-rotation. x-axis and y-axis are used for the breaks. z-rotation is used for the rudder. The hardware works fine. I can trim all three settings in the configuration settings.
29 Μαΐ 2021 · The X-axis runs along the length from the stern towards the fore. The Y-axis runs along the breadth or beam of the ship and is positive towards the port side. Lastly, the Z-axis runs along the height of the vessel and is positive in an upward direction.
8 Νοε 2011 · Generaly the axis are selected so that a positive longitudinal moment generates a pitch up, a positive transverse moment generates a starboard down moment. Two common systems in the US are: 0,0,0 is located at midships, centerline, baseline. X is positive forward, y is positive port, z is positive up ( i.e. z up right hand rule).
30 Μαΐ 2021 · The X-axis runs along the length from the stern towards the fore. The Y-axis runs along the breadth or beam of the ship and is positive towards the port side. The Z-axis runs aloppng the height of the vessel and is positive in an upward direction.
