Αποτελέσματα Αναζήτησης
13 Φεβ 2024 · X-Axis. In CNC, which is the X-axis? The X-axis is the left-to-right horizontal axis of the cutting tool along a workpiece and is responsible for holding the workpiece in place. It is one of the three primary linear axes in CNC that make up the machine’s coordinate system.
27 Ιουν 2023 · Depending on the type of machine and the work envelope’s orientation (i.e., horizontal or vertical), these two axes can be a combination of the x-axis and y-axis, the x-axis and z-axis, or the y-axis and the z-axis.
The book, The Art of Scalability, describes a really useful, three dimension scalability model: the scale cube. In this model, scaling an application by running clones behind a load balancer is known as X-axis scaling. The other two kinds of scaling are Y-axis scaling and Z-axis scaling.
The three-dimensional cartesian coordinate system consists of three axes, the x-axis, the y-axis, and the z-axis, which are mutually perpendicular to each other and have the same units of length across all three axes.
When performing precision shaft alignment on horizontal rotating machinery, the Z axis refers to the rotational axis or rotational centerlines. The Y axis refers to vertical position (perpendicular to the base) and the X axis refers to the horizontal position (parallel to the base).
When viewed from the front of the machine, the X axis runs from left to right, the Y axis runs from front to back, and the Z axis runs up and down, vertically perpendicular to the other two. The coordinate system: the Part Coordinate System.
1 Ιουλ 2004 · The X, Y and Z axes of the Machine Coordinate System refer to the machine’s motions. When viewed from the front of the machine, the X axis runs from left to right, the Y axis runs from front to back, and the Z axis runs up and down, vertically perpendicular to the other two.
