Αποτελέσματα Αναζήτησης
Define the machining process for the various workpiece geometries using the appropriate strategies. First of all, roughing strategies are applied, e.g. roughing in the Z plane or equidis-tant from the surface geometry. CAM systems offer various options from 2 1/2-axis to 5-axis machining.
8 Απρ 2021 · Place your hand in front of your CNC machine, aligned with the machine’s spindle, and you’ll see the axes line up perfectly. Middle finger is the Z-axis. Index finger is the Y-axis.
The three directions in the Cartesian coordinate system are specified as the axes X, Y, and Z. The axes are mutually perpendicular and intersect at one point: the datum (origin). An absolute coordinate designates the distance to the datum along a single axis.
Parts to be machined is fastened to the machine table. This table moves in the XY-Plane. As the operator faces the machine, the X-Axis moves the table left-right. The Y-Axis moves the table forward-backward. The machine column grips and spins the tool. The column controls the Z-axis and moves up-down. Figure 1. VMC Machine Motion
15 Ιαν 2006 · This application note describes the use and setup of rotary tables and heads for 4 and 5-axis machining. Pitch/Yaw of the tables or Swivel/Tilt of the head enable cutting complex 3-D contours like those found in molds and dies, aerospace and automotive, and many more.
8 Σεπ 2024 · Using an X, Y or Z code in a CNC program tells the machine to go to a specific location along those axes. Location changes can be in one or more axes. If only a Z axis coordinate is given then the machine will only move in the Z axis.
To define roll, pitch, and yaw in linear systems, we first need to establish the three primary axes: X, Y, and Z. The two axes of the horizontal plane are typically defined as X and Y, with the X axis being in the direction of motion. The Y axis is orthogonal (perpendicular) to the direction of motion and is also in the horizontal plane.
