Αποτελέσματα Αναζήτησης
Define the machining process for the various workpiece geometries using the appropriate strategies. First of all, roughing strategies are applied, e.g. roughing in the Z plane or equidis-tant from the surface geometry. CAM systems offer various options from 2 1/2-axis to 5-axis machining.
Definitions Axis – An accessory that enables the CNC to operate as a lathe. Axis – Direction of movement. On a three-axis machine: X (left-right), Y (front-back) & Z (up-down).
Avid CNC Rotary Axis Users Guide. Version 2019Q3.3. This guide contains useful tips for operating your Avid CNC Rotary Axis. 1. Mach4 Control Software. Operation Note. If you have not installed and configured Mach4, follow the instructions in the CNC Software Setup Guide.
Each of these values controls the number of steps per millimeter, respectively for the X, Y and Z axis. If you do not have the Z axis, you can ignore the last value.
axis by incrementally increasing the value and then sending a test gCode command to move the axis. Be sure the command allows the axis to move enough to reach constant
The x-axis is the horizontal line along which the wall to your left and the floor intersect. The y-axis is the horizontal line along which the wall to your right and the floor intersect. The z-axis is the vertical line along which the walls intersect.
three axes: •The X axis controls the table movement left or right. •The Y axis controls the table movement toward or away from the column. •The Z axis controls the vertical (up or down) movement of the knee or spindle.
