Αποτελέσματα Αναζήτησης
7 Ιαν 2021 · PH (2.0mm pitch) This 2.0mm pitch connector is very commonly seen in low cost consumer electronics as well as a plenitude of pre-fabricated hobbyist PCBs and parts. They’re dirt cheap, reasonably compact but not particularly robust. A similar dual row type is also available (PHD) however using different contacts.
16 Δεκ 2022 · It is a JST PH. The female PH has a wide cut out and two holes at the bottom (2 mm pin spacing), whereas the XH has two slots from the top towards the bottom (2.5 mm pin spacing). Here is an example with 6 pins
<p>JST 2.54mm connector. Folded beam contact, box-shaped shrouded header, header with a boss, interchangeability, conformance to the HA terminal</p>
12 Ιουν 2019 · Well, I'm pretty sure it is this one JST XH2.54 2 Pin Connector Plug. The key seems to be the 2.54 which is, apparently, the pin spacing. Thanks for your help.
PH1.0 has a pitch of 1.0mm and PH2.0 has a pitch of 2.0, although there are others. There are usually other distances, like connector height, rated ampacity, and so on. Here's the PH2.0 datasheet that has some drawings that should help:
JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). [1] JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.
26 Αυγ 2020 · XH2.54 connectors from JST: We have several inquiries about this connector since it is a commonly used pin header on power supplies, eval boards, etc.
