Αποτελέσματα Αναζήτησης
<p>JST 2.54mm connector. Folded beam contact, box-shaped shrouded header, header with a boss, interchangeability, conformance to the HA terminal</p>
7 Ιαν 2021 · PH (2.0mm pitch) This 2.0mm pitch connector is very commonly seen in low cost consumer electronics as well as a plenitude of pre-fabricated hobbyist PCBs and parts. They’re dirt cheap, reasonably compact but not particularly robust. A similar dual row type is also available (PHD) however using different contacts.
To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch, such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations.
5 Φεβ 2021 · But, on the same website I found this one, and it has a few variant of right angle connectors. https://www.diymodules.org/download/eagle-libs/shr/0000000053/con-JST%20XH.lbr. Printed out both of 4 pin layout and it seems that the 2.50mm and 2.54mm are the same, just named differently.
PH1.0 has a pitch of 1.0mm and PH2.0 has a pitch of 2.0, although there are others. There are usually other distances, like connector height, rated ampacity, and so on. Here's the PH2.0 datasheet that has some drawings that should help: https://www.jst-mfg.com/product/pdf/eng/ePH.pdf.
16 Δεκ 2022 · The female PH has a wide cut out and two holes at the bottom (2 mm pin spacing), whereas the XH has two slots from the top towards the bottom (2.5 mm pin spacing). Here is an example with 6 pins PH vs XH
12 Ιουν 2019 · Well, I'm pretty sure it is this one JST XH2.54 2 Pin Connector Plug. The key seems to be the 2.54 which is, apparently, the pin spacing. Thanks for your help.
