Αποτελέσματα Αναζήτησης
27 Οκτ 2020 · Sealing New Surfaces & Preparing Old: New Wood Surface: Requires a thin seal coat of Envirotex Lite prior to flood coating. Mix approximately 1/4 the amount you would use to flood coat. Spread thinly over entire surface then scrape off all excess with a piece of cardboard or plastic spatula.
- EnviroTex Lite IOC HIGH GLOSS
EnviroTex Lite IOC HIGH GLOSS EnviroTex Lite® is a reactive...
- EnviroTex Lite IOC HIGH GLOSS
ETI Resin Spray & Sealer is a fast drying, high solids acrylic spray. This product is ideal for sealing porous surfaces such as paper or wood prior to flood coating with EnviroTex Lite.
ENVIROTEX LITE® IS A REACTIVE POLYMER COMPOUND: It cures to a thick, glossy coating in about 8 hours at 75°F (24°C), and reaches full strength and hardness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss.
13 Σεπ 2020 · EnviroTex Lite IOC HIGH GLOSS EnviroTex Lite® is a reactive polymer compound. It cures to a thick, glossy coating in about 8 hours at 7Cr F, and reaches full strength and hardness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat, also known as a flood coat, is all that is usually
In this video resin expert Mylene Hillam demonstrates how to work with EnviroTex Lite Pour-On High Gloss Finish.
26 Οκτ 2016 · Porous fabric or paper should be sealed with one or two coats of white glue prior to flood coating. EnviroTex Spray Sealer No. 4013 is available in a 13 oz. spray can.
EnviroTex <strong>Lite</strong>® is a reactive polymer compound.<br />. It cures to a thick, glossy coating in about 8 hours at 70° F, and reaches full strength<br />. and toughness in about 72 hours. This durable, resilient material requires no polishing<br />. to produce a high gloss.
