Αποτελέσματα Αναζήτησης
APPLICATION: Apply mix with a small spreader to area. Scrape off the excess paste to the contour of the surrounding area. Slightly overbuild above the surrounding gel coat to ensure proper thickness, Heat may be introduced to accelerate the curing and reduce recoat time.
18 Αυγ 2009 · Instructions: Make sure damaged areas are clean and free of dirt, grease and wax, etc. Gel-Paste should be added to a plastic mixing cup to make all repairs. One of the six basic colors may match the gel coat.
16 Ιουν 2024 · For smaller repairs the gelcoat can be brushed on, but larger repairs, most manufacturers recommend application by spray gun. If working on a Kevlar hull be very careful when sanding not to sand into the fabric.
*AN UPDATED VIDEO HAS BEEN UPLOADED* A question I get most asked is "how do I apply gelcoat" while the answer is never a quick or short one, I decided to mak...
Gel coat quality in a pate. Repair larger areas of gel coat scratches, nicks and gouges. Mix paste with Evercoat Color agents to match the gel coat’s original; color. This neutral paste will make permanent repairs on gel coat and fiberglass panels. Will also adhere to most woods and metals.
APPLICATION: • Apply catalyzed material to a thickness of 20 mils, or slightly above the surrounding gel coat. • Apply enough to slightly overfill to allow for finish sanding. • Allow approximately 30 minutes to gel and apply EVERCOAT PVA Mold Release, or apply a physical barrier such as acetate or wax paper during cure.
Complete instructions guide you through the process. Ideal for small repairs above and below the waterline. Repair that small scratch that just won’t buff out with a West Marine Gel Coat Repair Kit.
