Αποτελέσματα Αναζήτησης
18 Αυγ 2009 · Gel-Paste should be added to a plastic mixing cup to make all repairs. One of the six basic colors may match the gel coat. If so, mix approximately 1 part pigment to 20 parts gel paste (in other words, fill the cup 1/4 in and add approximately 1-2 inch bead of pigment from the tube).
27 Δεκ 2022 · EVERCOAT Gel-Kote™ Line Overview. This training module will review the differences between waxed (One-Step Gel Coat) versus un-waxed gel coats (Premium Gel Coats), differences between neutral gel coats and white gel coats from EVERCOAT, how to apply PVA Mol Release, when to be able to use acetate films and tips for mixing and color matching ...
Gel coat quality in a pate. Repair larger areas of gel coat scratches, nicks and gouges. Mix paste with Evercoat Color agents to match the gel coat’s original; color. This neutral paste will make permanent repairs on gel coat and fiberglass panels. Will also adhere to most woods and metals.
16 Ιουν 2024 · The Evercoat gelcoat is easy to work with, but keep in mind that the working time can be short. Uncatalyzed gelcoat can last for a few years, so that makes the cost more bearable. The are many videos on gelcoat repair on the West Marine and Evercoat websites last I looked.
18 Αυγ 2009 · Application. Apply catalyzed gel coat to a thickness of approximately 20 mils or slightly above surrounding gel coat. Gel coat is best applied by spray application with a pressure pot or catalyst injection system. Gel coat also can be applied with a standard paint gun with primer nozzle (70-80 thousandths) at 40-50 psi or Preval sprayer.
105671 – Gel-Kote, White, Quart. The highest-quality, ISO NPG marine finish gel coat used to permanently repair or replace original, high-gloss finish. The product cures to a hard finish and does not require Evercoat Mold Release (#105685) to attain a fully-cured surface.
27 Δεκ 2022 · This module will show the recommended repair procedures for a chip, scratch/crack, small and large repairs, and application procedures showing the use of One Step Gel-Kote and Laminating Gel-Kote with PVA Mold Release applied for proper cure.
