Αποτελέσματα Αναζήτησης
Haas Technical Documentation Effective Date: SL-10 - Tool Turret January, 2001 - June, 2011 1 2 3 4 5 6 7 8 9 10 12 13 11 21 20 19 18 17 16 15 14 22 23 24 25 26 29
- SL-10 - Tailstock - Haas Automation Inc.
Haas Technical Documentation Effective Date: SL-10 -...
- SL-10 - Tailstock - Haas Automation Inc.
Haas Technical Documentation Effective Date: SL-10 - Tailstock January, 2002 - June, 2011 19. Eccentric Clamp 21 23 24 25 26 27 28 29 22 14 15 16 17 18 19 20 12 13
Haas Technical Documentation Effective Date: SL-10 - External Enclosure January, 2001 - June, 2011 View Rotated 180o 2 1 5 8 6 18 10 19 13 14 15 7 3 4 25 31 32 33
Remove the 4 nuts on the back of the tailstock cylinder. Remove the back of the cylinder and then the cylinder housing. Remove the two seals from the end of the cylinder. One of the seals is inside the bore of the cylinder. Install two seals to the end of the cylinder.
All new HAAS SL Series Turning Centers are warranted exclusively by the Haas Automation’s ("Manufacturer") limited warranty as follows: Each Haas CNC machine ("Machine") and its components ("Components") (except those listed below under limits
Torque the SHCS that attach the foot to the lathe base in an even and gradual pattern to 200 ft-lb. Verify that the runout has been maintained after the tailstock foot is torqued.
Install a boring bar toolholder into tool position #1. Ensure the bore of the toolholder is clean and free of any burrs, chips, or other contaminants. The toolholder must be seated completely against the turret. 9. Jog the X-axis down to the original spindle centerline. Copyright 2015 by Haas Automation, Inc. No unauthorized reproduction.
