Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

1. www.superhonda.com › threads › diy-painted-valve-coverDIY: Painted valve cover | Honda and Acura Car Forums

   www.superhonda.com › threads › diy-painted-valve-cover

   • Αποθηκευμένο αντίγραφο

   20 Δεκ 2006 · Clean off all oil and dirt on the valve cover with water/soap. 4. Spray or brush the paint stripper on the painted surface generously and let sit for about 5 minutes (depending on how strong it is.) Then wash it off with a hose or run it under a sink and the old paint should come right off with a little help.

2. www.d-series.org › threads › diy-valve-cover-removal-re-install-w-new-gasketsDIY Valve cover removal & re-install w/new gaskets.

   www.d-series.org › threads › diy-valve-cover-removal-re-install-w-new-gaskets

   • Αποθηκευμένο αντίγραφο

   12 Σεπ 2008 · This is for if you want to take off your valve cover to paint it, replace it, change the old gaskets and then re-install it. You'll need: 1) 10 mm socket and wrench. 2) flat head screw driver medium sized. 3) full valve cover gasket set for your motor (Main gasket, spark plug tube seals, bolt grommets) 4) Liquid gasket or Hondabond.

3. honda-tech.com › how-tos › aHonda: How to Paint Your Engine Cover - Honda-Tech

   honda-tech.com › how-tos › a

   • Αποθηκευμένο αντίγραφο

   3 Μαρ 2015 · Clean with paper towels, cloth towels, or a sponge. You don’t have to wash the inside of the valve cover, but if you see oil buildup, then consider cleaning it at this time. If your valve cover was previously painted, use paint remover to remove old paint. Work on a flat, clean surface.

4. www.civicx.com › forum › threadsValve cover gasket replacement, with snapped bolt extraction

   www.civicx.com › forum › threads

   • Αποθηκευμένο αντίγραφο

   22 Φεβ 2022 · I did not even need to remove the valve cover to do this, provided I have the right tools. Most likely I will need to remove it as it never was torqued correctly with the new gasket and Hondabond. I will update if it leaks and I need to redo the Hondabond.

5. www.instructables.com › How-to-Strip-the-Paint-From-a-Valve-CoverHow to Strip the Paint From a Valve Cover - Instructables

   www.instructables.com › How-to-Strip-the-Paint-From-a-Valve-Cover

   • Αποθηκευμένο αντίγραφο

   Video tutorial on how to strip the paint from a valve cover. If you are deciding on painting your valve cover or polishing an aluminum cover, then you will need to strip any existing painted finish.

6. www.team-integra.net › threads › painting-valve-coverPainting Valve Cover | Team Integra Forums

   www.team-integra.net › threads › painting-valve-cover

   • Αποθηκευμένο αντίγραφο

   6 Νοε 2002 · This is an article covering my modification, stripping and painting of a b16a head cover. The standard disclaimer blurb applies: be careful and wear/use the proper protection Tools and equipment needed:

7. ranwhenparked.net › how-to-paint-valve-coversHow to Paint Valve Covers: A Step-by-Step Guide for Car...

   ranwhenparked.net › how-to-paint-valve-covers

   • Αποθηκευμένο αντίγραφο

   4 Οκτ 2024 · Painting valve covers is a task that can transform the look of your engine bay from standard to standout. It involves careful preparation and the right application of materials to ensure a high-quality finish that not only looks good but also stands up to the harsh conditions under the hood.