Αποτελέσματα Αναζήτησης
this is the best way to remove a steel bolt that is in aluminum housing due to oxidation and corrosion.
24 Νοε 2016 · Do a cone drill and a cone bolt tip, arc weld the bolt. Do a passing-through drill almost the bolt diameter to make it weak, then pass another threader, and then the one the bolt was. Use salted water electrolysis to dissolve steel. Then finish unscrew it by any means :) My experience: Propane torch, very few tries, but see they need a lot of heat.
15 Ιουλ 2016 · Smacking the head of the bolt a few times with a hammer can help, as can doing a small 'tightening' turn before loosening it. However, the best way is to hit it with heat. The aluminum case itself is going to expand significantly faster than the bolt, so that can break up the corrosion enough to unbolt it.
18 Νοε 2021 · In this comprehensive guide, we'll explore four effective methods for removing stripped or seized nuts and bolts.
Manifold studs break, and most extraction methods include drilling it out, and ruining the aluminum threads. Here's a neat way to use a battery and a welder ...
29 Αυγ 2011 · This include tips on how to remove a rounded bolt or a bolt with a stripped head in addition to those that are seemingly stuck in place for all eternity. 1. Blunt Impact/Force – This is usually my first step when attempting to loosen stubborn bolts.
13 Ιουν 2013 · Heat the bolt or stud up to red hot and quench it as best possible. You might have to repeat this several times, but what it is doing is shrinking the threaded section so it will pull away from the corrosion.
