Αποτελέσματα Αναζήτησης
1. Place the Knox Residential Box with hanger over the top of the entry door. Position the unit on the hinged side of the door. 2. Check to see that the hanger does not interfere with the door weather seal. 3. For semi-permanent installation, fasten hanger to door with small screws or nails to prevent removal. 4.
If installing the box on a thin or hollow wall, use a solid backing (like 3/8" steel plate fastened to solid studs on both sides) for secure mounting. Mounting to solid beams or steel support is best. Installation of this product should be performed only by individuals skilled in the use of the tools and equipment necessary for installation.
26 Σεπ 2017 · A Knox-Box is primarily used for emergency access to public, residential or commercial buildings. The box, also known as a rapid entry system, allows emergency fire and medical personnel quick entry into the building without the use of damaging force.
WARNING: Read all instructions carefully before beginning installation. This unit must be installed by a qualified installer and in accordance with applicable local codes and ordinances that govern this type of equipment.
7 Φεβ 2011 · Per the Knox installation instructions, all boxes should be attached to a solid wall, beam or post using at least 4 Grade 5 or 8 fasteners of 3/8” diameter. If the box is mounted on a secure wall per the Knox installation instructions, it will be extremely difficult to knock the box off the wall.
The Kennewick Fire Department highly recommends the use of a Knox HomeBox for use at homes where the occupant may not be able to open the door to first responders in an emergency, without property damage.
Ten Reasons to Install a KNOX-BOX KNOX-BOX@ and your local fire department are working hand-in-hand to offer the best in fire protection and the finest in fast and secure emergency access. Eliminate needless, costly forced entry damage that may not be covered by your insurance deductible.
