Αποτελέσματα Αναζήτησης
4 Αυγ 2023 · Roomba® i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba® is turned on, you can also press the bumper to repeat the message.
4 Αυγ 2023 · Roomba i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba is turned on, you can also press the bumper to repeat the message.
19 Νοε 2021 · Error nine (9) means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If no debris is found, it is also possible the bumper could be dislodged from the robot.
25 Ιουλ 2024 · Roomba® j Series and Roomba Combo® 10 Max will tell you something is wrong with the light ring around the button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the button.
24 Φεβ 2024 · Roomba 900 series error messages chart. Roomba will tell you something is wrong with a blinking troubleshooting indicator and a two tone “uh-oh” sound followed by a narrated voice. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button.
19 Νοε 2023 · In this Roomba troubleshooting guide, you will learn how to fix your Roombas problems and understand various error messages. Roomba Error Codes Explained. Over the years, iRobot has changed some of the error code designations depending on the model.
19 Ιουλ 2023 · The troubleshooting indicator will blink. Roomba will play a two-tone “uh-oh” sound, followed by a narrated voice. Note: If the battery indicator is blinking while Roomba is charging, consult the charging error messages chart. Error messages can be repeated by pressing the CLEAN on the robot.
