Αποτελέσματα Αναζήτησης
Pre bent and notched 4130 chromoly tubing with all of the flanges and hardware needed to install this kit on your fox body mustang. This design uses 3 bolt flanges to make the front bumper support removable as well including all of the hardware to make your upper and lower radiator mounts removable.
- Tool Holders
OutlawChassisFab@gmail.com. 606-922-5704 (PLEASE leave a...
- Tool Holders
79-93 25.3/2 Foxbody Cage Kit -Tight fitting and certifiable according to NHRA Specs and your vehicle weight! -25.3 certifies to 6.50 seconds at 3600 lbs max -25.2 Certifies to 6.00 seconds at 3200 lbs max -CAD designed -4130 Chromoly -Back-half Kit setup for 20 inch 4 link bars -Available in 2 Options: *Pre-Ben
Whether you drive your Mustang daily, take it to the strip or road race, our chassis system is guaranteed to yield significant performance improvements. The addition of Griggs Coil Over Konis and rear lower control arms makes this kit pack a big punch.
This is the only complete integrated solution that solves all of the shortcomings of trying to build a Fox Body to today's standards. The bolt-on chassis requires no floor or body modifications, fitting popular drivetrains like the Coyote, Godzilla, EFI SBF, and LS/LT engines.
17 Ιουλ 2024 · Save time waiting for a chassis shop and go racing instead! This is a fully welded chassis kit that will accept a stock shell foxbody. Every cage is fit inside our Jig car which provides you the customer a perfect fitting cage. Body connects to the cage using 6x6 plates welded to the rockers.
This chassis consists of over 600 individual pieces. The chassis is constructed of tube steel coupled with precision cut panels and reinforcing members to mimic the design of the original Lamborghini chassis. The chassis is dimensionally correct to the original.
17 Ιουλ 2024 · 79-93 Foxbody 25.5 Cage Kit Offered in two styles! 1. Pre-bent and ready to notch and weld -Notching is required. 2. Pre-bent and Notched -Hold and weld style. Standard Down bars are through the Speaker Hole on non backhalf kits. Options available if you want a lower or straight bar.
