Αποτελέσματα Αναζήτησης
8 Ιουλ 2015 · Sold my RCBS chargemaster to improve my powder weight from .1 to .01 grain accuracy. I arranged some VV N 150 45 grains loads with my 20 euros Lee powder dispenser in order to add 1 grain using GemPro scale and Omega trickler.
7 Μαρ 2024 · I only reload for 130 grain lead round nose bullets and for 115-116 grain hollow pointed versions of those same round nose bullets. This nice-looking Lee adjustable disk appears to only have one adjustable powder hole; not that it makes too much difference.
7 Δεκ 2014 · First, I bought a Lee classic kit. Came with the breachlock press, powder dispenser, scale and a few other odds and ends. My biggest concern is this powder dispenser. I read, reread and reread all of the procedures for calibrating and calculating the desired charge.
8 Ιουλ 2015 · Have Lee, RCBS and Lyman that have been using for years. The Lee gets used for extruded powder since it is more accurate on drops than the other 2 but they both beat it with Ball powders. For the $ Lee is a good one especially for extruded powders, ball not so much IMO.
16 Αυγ 2020 · It was using Lee published VMD to generate all possible powder charges from one or two set of Auto Disks, selecting the most similar holes possible. Good luck and tight groups
14 Ιουν 2010 · #2 · Jun 14, 2010. Leon said: I'm new to rifle reloading, and have reloaded 7.62X54r, 6.5X55 Swede, and 7.5X55 Swiss. I weigh EVERY charge. So far I've been using a Lee dipper set to dispense powder to the scale pan. (I have a RCBS/Ohaus 510 powder scale.)
26 Φεβ 2007 · I bought the Lee Pro auto powder dispnser for my Lee 2006 classic turret press. The instructions aren't clear on how to set it up. I even watched videos on installation. Can someone clue me in on proper set-up, particularly the ball chain hook-up?
