Αποτελέσματα Αναζήτησης
Your GFCI outlet installation is a DIY project, but what happens if your GFCI is not working or won’t reset? It could be an issue of line load reversal.
• The GFCI is miswired due to reversal of the LINE and LOAD connections. • The GFCI cannot pass its internal test, indicating that it may not be able to provide protection in the event of a ground fault. Important: DO NOT install the GFCI receptacle in an electrical box containing (a) more than four (4) wires (not including
GFCI's contain a lockout feature that will prevent RESET if: • There is no power being supplied to the GFCI. • The GFCI is miswired due to reversal of the LINE and LOAD leads. • The GFCI cannot pass its internal test, indicating that it may not be able to provide protection in the event of a ground fault. 2. The GFCI's features 3.
Steps: Plug a lamp or radio into the GFCI outlet and turn it ON. Push the TEST button on the GFCI. The GFCI will trip and power to the lamp or radio will be cut OFF. Your SmartlockPro GFCI is working properly only if you can push the RESET button on the GFCI to restore power to the lamp or radio.
Plug a lamp or radio into the GFCI (and leave it plugged in). Turn the power ON at the service panel. Ensure that the GFCI is still in the tripped condition by pressing the TEST button. If the lamp or radio is OFF, and the GFCI will not reset, go to the Troubleshooting section as the Line and Load connections are reversed.
You can always conduct a manual TEST and RESET sequence to confirm the GFCI is functioning properly. If the Leviton self-test has conducted a self-test and everything has checked out OK the indicator light will be green. If the indicator...
Troubleshooting After Installation. There is no power at my Smart GFCI Outlet and the Indicator LED is off. What do I do? 1 year ago. Updated. Follow. Your Smart GFCI Outlet is in a tripped state. To reconnect power and restore protection, press the Reset button.
