Αποτελέσματα Αναζήτησης
Enter the IP address of your access point. By factory default, the IP address will be assigned by a DHCP server (usually the network router). If there is no DHCP server on your network, the default IP address is 192.168.1.252/255.255.255.0. Note—Use a computer hardwired to the same network as your access point for browser - based setup access.
- Linksys LAPN600
IP address of your access point. By factory default, the IP...
- Linksys LAPN600
IP address of your access point. By factory default, the IP address will be assigned by a DHCP server (usually the network router). If there is no DHCP servernour o y network, the default IP address is 192.168.1.252/255.255.255.0. Note: Use a computer hardwired to the same network as your access point for browser-based setup access.
• Keep wireless routers, access points, or gateways away from exterior walls and windows. • Turn wireless routers, access points, or gateways off when they are not being used (at night, during vacations). • Use strong passphrases that are at least eight characters in length. Combine letters and numbers to avoid using
Step 1: Access the access point’s web-based setup page. For instructions, click here. NOTE: If you're using a Mac® computer to access the access point's web-based setup page, click here. Step 2: On the access point’s web-based setup page, click on the Setup tab and change the IP Address to 192.168.1.x where x is any number from 2 to 253. Step 3:
Type in default username: admin, and password: admin. 4. Click Login to launch the browser-based setup and follow the on-screen instructions. Figure 1: Password Dialog If you can't connect—It is likely that your PC’s IP address is incompatible with the wireless access point’s IP address.
access point will fall back to its default IP address: 192 168 1 252, with a network mask of 255 255 0 Or, if your PC’s IP address is not compatible with this, you must
If you have a 48VDC Power Injector (e.g. Linksys WAPPOE), power up your Access Point first, then connect the Injector’s cable to your PC. Configure your PC to have the static IP address on the same subnet as the Access Point’s default IP address (192.168.1.245).
