Αποτελέσματα Αναζήτησης
If there is no DHCP server on your network, the default IP address is 192.168.1.252/255.255.255.0. Note—Use a computer hardwired to the same network as your access point for browser -based
- Wireless-G Access Point - Linksys
NOTE: Resetting the Access Point will erase all of your...
- How do I look up my router's IP address to access the router's settings ...
1. Tap on the Settings icon. 2. Tap on Connections. 3. Tap...
- Accessing the Linksys Smart Wi-Fi Router's user interface using the ...
1. Launch a web browser. 2. In the Address bar, enter your...
- How to set up the Linksys Dual-Band WiFi Router to Bridge Mode
Select Bridge Mode to use the Linksys Dual-Band WiFi Router...
- Wireless-G Access Point - Linksys
NOTE: Resetting the Access Point will erase all of your settings (including wireless security, IP address, and power output) and replace them with the factory defaults. Do not reset the Access Point if you want to retain these settings. POWER The Power port connects to the Access Point’s power adapter.
IP address on the access point (The default IP address for the access point is 192 168 1 252 ) If you use this method, you will need to reconfigure the cabling for subsequent
1. Tap on the Settings icon. 2. Tap on Connections. 3. Tap your Wi-Fi name. 4. Tap on the gear icon. 5. Tap Manage router. 6. A browser will open on your device. The IP address shown in the Address bar is your router’s IP address.
1. Launch a web browser. 2. In the Address bar, enter your router’s IP Address or “myrouter.local” then press [Enter]. NOTE: The default IP Address of the router is 192.168.1.1. If you changed it, enter the new IP Address instead. 3. When the Linksys Smart Wi-Fi Account login appears, click the local access link below the Sign In section. 4.
Page 46: Figure 7-3: Setup - Static Ip Screen Wireless-G Access Point Select Static IP if you want to assign a static or fixed IP address to the Access Point. Then complete the following: IP Address. The IP address must be unique to your network. We suggest you use the default IP address of 192.168.1.245. Page 47: The Setup - Ap Mode Tab
Select Bridge Mode to use the Linksys Dual-Band WiFi Router as a wireless access point instead of a router. Make sure that you connect this router’s internet port to the ethernet or LAN port on the router that is connected to your modem.
