Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. 20 Μαρ 2024 · If you have a GM vehicle chances are good that BRP Hot Rods has the parts you need to easily LS or LT swap it. To put the BRP Hot Rods LS Swap Kit Builder to use we went through the entire process ourselves to assemble a complete swap package that we will be using to LS swap our ’96 Caprice.

  2. 28 Ιουν 2024 · Everything for our LS swap in our ’96 Caprice bolted right up, thanks to the BRP Hot Rods kit we ordered. Now it was time to finish off the installation with the necessary cooling, exhaust, and electrical components to allow our 5.3L engine to live a long, happy life under the hood of Project ODB.

  3. 8 Ιουν 2008 · Now because BRP fitted the headers with the motor roughly 1.5" forward from my location, I knew there was a chance I'd run into clearance issues. I had a slight interference with the front LCA mount. I was able to trim the mount slightly and that was it.

  4. BRP Hot Rods offers high-quality LS & LT engine conversion kits for 1955-2005 cars and trucks. Developed from real projects for the best fit, our kits make your engine swap quick, easy, and done right.

  5. 27 Μαΐ 2010 · 1. Clean everything once it's been removed. Especially the threads on the bolts in order to insure correct torquing later on. 2. Examine everything you remove and look for any sign of damage, wear or anything that may fail later on. 3. Follow recommended torque specs and sequences, like head and intake manifold bolts.

  6. 13 Ιαν 2010 · i actually have the exact kit you are refering to from summit. the hedman kit comes with brp mounts and crossmember. the steering shaft clearance issue looks like it can be fixed with a steering shaft from an early 80s s10. im kinda worried about the clearance on passenger side though.

  7. 11 Αυγ 2021 · Well, you will need to figure out the fuel system, cooling, exhaust, and lastly, the wiring, which is what we are going to focus on in this article with the help of Bill Hillock, owner of BP Automotive. Installing a standalone harness for an LS swap is really simple if you take your time. What You Need To Know.

  1. Γίνεται επίσης αναζήτηση για