Αποτελέσματα Αναζήτησης
8 Μαρ 2010 · I know Fm makes a good product, but i know greddey makes good entry level turbo kits as well. it also allows me to work and and build (and pick my own products) as i go along. i think 12psi i will see 200rwhp with the LInk and the greddy kit, fuel pump, injectors, FMIC, and 2.5 - 3 inch downpipe.
12 Αυγ 2007 · I decided on the Greddy turbo kit as I can't see me going past about 200bhp (time will tell ), it's an all-in-one package which uses a Mitsubishi TD04 turbo so you can, if you want, put it on straight out the box and drive off, and it is available in the UK for a reasonable amount of money.
The base GReddy kit was designed to add some oomph to the stock 1.6L Mazda Miata so we wouldn't be outrun by minivans. =) It came with all the parts necessary to run 4.5psi of boost. It was put together as a low boost kit built around the Mitsubishi TD04H-15G turbo.
1 Φεβ 2012 · I straight away fitted a cooler and got advice direct from 'bandaid master' Olderguy on MT on his experience with the stock GReddy kit at various boost psi. So, tantop injectors, Bipes fitted and pump pressure is a healthy 80-85psi. Wideband is confirming reasonably good AFRs.
Reply. Drogdar • 1 min. ago. Get on miata turbo dot net. It probably has an FMU and doesn't have an IC because its running low boost (like, under 10 psi). You basically have two options (assuming you have a stock ECU): leave it alone, it's been reliable so leave it alone.
23 Ιαν 2024 · Hi all, I have a greddy turbo kit for my 1.6, it’s been upgraded a good amount (only greddy manifold and turbo are being used). Timing is still set back 6 degrees on timing per instructions says. I’ve been running 5 psi, I just picked up a pnp pro 3 and was wondering if i heee to turn timing back to normal or should i keep it to that 6 degrees.
12 Νοε 2002 · 4.5-5 psi turbo kit for NA6 Miatas. Kit included: exhaust manifold, turbo unit, intake pipes, airfilter, nuts and bolts, oil lines, gaskets, instructions 9in Japanese, fuel pressure regulator, fuel lines, and vacume hoses. Over all I'm satisfied with the product. Took about 10 hours of easy work to install.
