Αποτελέσματα Αναζήτησης
Turn the shifter knob counter-clockwise to remove it. To Install the Shifter Knob: Step 1: Make sure the jam nut is still in place on the shifter lever. Step 2: For shifter knobs manufactured 1995 and later, screw the shifter knob onto the shifter lever until the release button comes up flush with the top of the shifter knob. To Remove the ...
Refer to Fig. 1 for the component names. Lokar Manual Transmission Shifter Knobs are designed to fit shifter levers with 3/8"-16 or 3/8"-24 thread patterns. Lokar's Composite Shifter Knobs come with both sizes of thread reducers and jam nuts.
Shift Knob Installation Guide. Stock Knob Removal. Gently pry and pull up interior trim around shifter, once loose, pull up over shift knob. Locate and gently spread the locking collar with a pick tool or small flat head screwdriver. Lift shifter boot and knob off as one piece.
Lokar Manual Transmission Shifter Knobs are designed to fit shifter levers with 3/8"-16 or 3/8"-24 thread patterns. Lokar's Composite Shifter Knobs come with both sizes of thread reducers and jam nuts. Lokar's Aluminum Shifter Knobs do not come with thread reducers and must be purchased specifically for one thread pattern or the other.
(Skip to about 2:49 to cut straight to the point)This video shows how to remove the shift knob, shifter boot, and center console/arm rest/cup holder assembly...
Gear knob installation instruction. Step 1: Remove shift knob and boot from car. Some knobs have set screws others simple pull off. Check your specific model for the proper method. Step 2: For cars with integrated boot/knob, use a razor blade to cut the factory boot all the way around base of the factory knob leaving boot as long as possible.
Install the shift knob collar onto the new ECS Shift Knob. Push the threaded end of the knob through the opening in the shifter boot until the boot is completely flipped inside out. Step #2. Slide the black collar nut over the shifter with the threaded side down.
