Αποτελέσματα Αναζήτησης
9 Απρ 2024 · The blue button is sending the "0" (digit) command. Digit "9" is sending the GUIDE command. Follow these steps. Step 1. Check the batteries of the remote control. Remove the batteries from the remote control for a few minutes to reset it. Check if the remote control is working again.
26 Απρ 2024 · Follow the solution in this article and check the related articles to make sure the Ambilight button on the remote control works correctly. Solution Please update your TV to software version 201.003.243.001 or newer.
• User manual - Read the user manual for TV information. • Troubleshooting - Find a solution for frequent ask questions. • Factory settings - Reset all settings to factory settings. • Reinstall TV - Reinstall and redo the complete TV installation. • Contact info - Show the telephone number or web address for your country or region.
8 Απρ 2024 · Does the LED light on the TV light up when pressing the button on the remote control? If not, try the following: 2- Remove/Change the batteries. Remove the batteries for a few minutes to reset the remote control. If this doesn't fix the issue, replace the batteries with new ones. 3- Obstacles
31 Ιουλ 2024 · Follow these steps: Switch off the TV to standby by pressing the “Power” button on the remote control. Pull the TV’s power plug from the power socket. Disconnect all devices from the TV. Wait at least two minutes and reconnect the power plug, leaving the external devices disconnected.
If the pairing with the remote control was lost, you can pair the TV with the remote control again. You can simply long press the PAIR key (approximate for 3 seconds) for pairing. Alternatively, go Settings > Wireless and networks > Remote control > Pair remote control, then follow the on-screen instructions.
12 Απρ 2023 · • Do not touch or apply pressure on TV screen during the refreshing process. • Always use remote control to switch off TV and keep the TV power plugged on when refreshing is triggered. * Note: In order to enjoy the best picture quality this process is essential. If the unit demonstrably did not have the chance to complete a refreshing ...
