Αποτελέσματα Αναζήτησης
Programming Remote to Control Another Device There are three ways that you can program your DISH Network remote to control another device, such as a TV, DVD, BD, VCR, audio receiver, or amplifier: • Scanning the Remote Database • Entering a Code • Learning Codes Use Scanning the Remote Database if you don’t know the device code.
For example, to program the remote to control a TV/VCR using code 748, follow the instructions to program the remote to control the TV using code 748, and then repeat the instructions for the VCR using the same code.
This article will help you program your DISH remote to your TV or other device like a DVD player. The article is most helpful if you just got a new TV/device or if the volume button on your remote is not working. Go to instructions for Hopper-family receivers or ViP-model receivers.
Pair Your Remote. Press and hold the device button you want to program until all four device buttons light up. Press and hold ∙ TV to pair with your TV ∙ DVD or AUX to pair with any other device. Enter the three-digit code for your device while the device buttons are lit up. See Device Codes in this guide. Press #.
Your remote may not be programmed to control functions on your TV. Check out these step-by-step instructions to pair your remote to your TV or another device. Why won’t my remote work with my DISH receiver? Often, this problem is due to dead batteries, or a remote or receiver error. Follow these steps to resolve your remote control issue.
Complete the following steps to configure your remote. Pull the remote battery cover off. Decide whether to use IR or UHF signals for the remote. Use UHF signals if you do not have a clear line of sight between the remote and the receiver. Set UHF/IR SWITCH to either UHF or IR.
Making the 6.4 UHF Remote Work with DISH-Player DVR 522 & 625 Receivers, con’t.
