Αποτελέσματα Αναζήτησης
The slope of a horizontal drainage pipe shall be not less than that indicated in Table 704.1 except that where the drainage piping is upstream of a grease interceptor, the slope of the piping shall be not less than 1 / 4 inch per foot (2-percent slope).
See Section 406.2 for sizing requirements for fixture drain, branch drain and drainage stack for an automatic clothes washer standpipe. See Sections 709.4 and 709.4.1.
This chapter shall govern the materials, design, and installation of sanitary drainage systems and building sewers. 701.2 Drainage Piping Materials for drainage piping shall be in accordance with one of the referenced standards in Table 701.2 except that:
3 5 1 Utility and Drainage Infrastructure Requirements 33 3 5 2 Alternative Pavements 34 ... 9 4 6 Texas Parks & Wildlife 122 9 4 7 FEMA122 ... 10 4 7 1 Drainage Area Map 133 10 4 7 2 Plan / Profile Sheets 133 10 4 7 3 Special Details 135
Pipe with 6-inch diameter may be used if the line is less than 1000 feet in length and interconnected between 2 lines which are 8-inch diameter or larger, or if the 6-inch line terminates in a cul-de-sac or dead end street and meets the additional rule of this chapter.
23 Σεπ 2024 · Rule 367.2 also adopts codes incorporated by reference within the 2018 International Plumbing Code, which include the 2018 International Fuel Gas Code and the 2018 International Residential Code.
This section provides guidelines for design of drainage facilities in the Town of Prosper. The procedures outlined herein shall be followed for all drainage design and review of plans submitted to the Town.
