Αποτελέσματα Αναζήτησης
1. Minimum Size. According to the regulation set by the IRC, the minimum size of toilet room is 30 × 60 (inches). Considering that the minimum dimensions for a bathroom with a shower is 6.25 ft 2 (900 in 2), these toilet space dimensions are enough for installing a shower.
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches. It is also important to note that an ada compliant toilet must be of 17 to 19 inches in seat height.
17 Μαΐ 2021 · Standard Toilet Dimensions: Typically range between 27-30 inches in depth, around 20 inches in width, and between 27-32 inches in height. The rough-in is usually 10-12 inches. ADA Compliance: For a toilet to be ADA compliant, its seat height should be between 17” and 19”.
10 Σεπ 2023 · Standard Toilet Dimensions, Sizes, and Clearance. The Standard Toilet Height is 15 inches (38 cm) from the floor to the top of the seat. The standard toilet width is 18 inches (46 cm) measured from one side of the tank to the other. The standard toilet length is 27–30 inches (69–76 cm).
10 Σεπ 2024 · Toilet dimensions aren’t standardized, but there is a typical range. Most toilets have a depth between 25 and 32 inches, depending on whether they have a round or elongated bowl. The average toilet width is 20 inches, with most toilets ranging from 13 to 21 inches at the widest point.
Read our guide to learn more about the features that impact standard toilet dimensions, how to measure a toilet and how to use this information to ensure a smooth installation and bathroom layout. Jump To: Toilet Bowl Shapes. How to Measure a Toilet. Standard Toilet Dimensions.
The most important toilet dimension when buying a new toilet is the rough-in measurement, which is the distance between the center of the closet bolts and the wall behind the toilet. To do this, take a tape measure and measure from the back wall (not baseboard) to the center of one of the rear closet bolts.
