Αποτελέσματα Αναζήτησης
24 Σεπ 2020 · If all signals aren't received and logged in within around 20-30 minutes, the system should log a fault and show a blinking or solid light (depends on nature of fault). If pressure is really low in the tire (s), the sensor should go into hyper-broadcast mode, and shout out a warning. Click to expand...
19 Σεπ 2023 · The most common reason for the tire pressure light to illuminate is low tire pressure. It could be due to natural air loss over time or a puncture in the tire causing a slow leak. Solution: Check the tire pressure of all your tires using a reliable tire pressure gauge and inflate them to the recommended level if necessary.
15 Νοε 2023 · Using the control on the left side of the steering wheel (SEE THAT SILLY BOOK IN THE GLOVE BOX) you should be able to bring up the TPMS pressure display between the speedo & tach. Are you seeing all 4 tires? Are they above 30 psi? Is the display blank? If you have good data but still have a yellow TPMS warning light, you have a system fault.
11 Μαρ 2019 · On a recent cold day, the TPMS warning light indicated that it could not connect to one or more of my eleven year old TPMS sensors. The tire pressure themselve are correct at 32/30. While getting other work done, the Subaru dealer quoted $219 total to replace one sensor. Does anyone have experience with Discount Tire replacing the sensors?
12 Σεπ 2020 · We had our first cool snap and tire pressures were about 3-4 PSI low. That might have triggered the TPMS. After topping off the tires, I've driven at least an hour, around 4 drive cycles, and have been above 20 MPH for much of that time. That should have reset the indicator.
29 Σεπ 2018 · My understanding is that the TPMS setup will allow you to select the tyre pressure units, psi etc., and three different sets of pressure values. So I have TPMS 1 set to normal tyre pressures and could have TPMS 2 set to winter tyre pressures and TPMS 3 set to caravan towing pressures.
8 Απρ 2021 · What it looks like is that the system is intermittently loosing signal to the sensors. It will be fine for a while, then will give us a TPMS alarm but have no pressures indicated on any of the tires. Then, after a few days it seems to read the sensors again, sees good pressures and clears the alarm. But it will happen again a few days later.
