Αποτελέσματα Αναζήτησης
Specifically, we leverage the fact that in the frequency ranges from 100 kHz to 40 MHz the electric field around the body behaves as a quasi-static near-field [36,3].
The Theremin has two very high frequency oscillators (around 350 kHz). One of them is fixed, and the other is varied by the capacitance of your hand: it's the difference between the two frequencies which decides the pitch.
27 Ιουν 2024 · The complete JFET-based theremin circuit includes a second oscillator, a mixer, and a circuit for the volume antenna. The second oscillator is stabilized at 470 kHz by a ceramic resonator, and so it must be possible to set the adjustable oscillator to this frequency.
These waves are of a definite length and frequency. The approach of a hand, which is an electrical conductor, alters the conditions in the electro-magnetic field surrounding the antenna, changes its capacity and thus affects the frequency of the alternating current generated by the apparatus.
Calibrating the Frequency Signal The frequency range for the Theremin should be at least two octaves (220 to 880 Hz). A second LabVIEW subVI called Scale Frequency.vi, as shown in Fig. 5, converts the second photometer signal level into a frequency level. The photometer input (0 to 6 V) is converted into an audio
29 Δεκ 2004 · The theremin is played by carefully moving your hands near 2 antennas, one for volume and one for pitch. But how does it work? If you mix the signals of 2 rf oscillators, you will get many output signals. The most important signals are the sum and difference of both frequencies.
The theremin, patented in 1928 by L`eon Theremin, is a musical instrument played without any contact from the musician. The theremin uses the heterodyne technique to generate an audio signal. Two oscillators, one connected to an antenna, operate at nominally the same frequency.
