Αποτελέσματα Αναζήτησης
Log in now via MyTransics to your TX-CONNECT. Note: To start the application, you can use Internet Explorer or Microsoft Edge. There is a plug-in available when you use Firefox or Google Chrome or Microsoft Edge Chromium.
- Connect
Log in now via MyTransics to your TX-CONNECT. One of our...
- Tx-Social
Log in now via MyTransics to your TX-SOCIAL. One of our GDPR...
- Login
Company code: Remember me
- Tx-Reports
Log in now via MyTransics to your TX-REPORTS. One of our...
- Connect
The EasyCare Tx 2 titration software allows users to remotely control positive airway pressure (PAP) therapy devices from a computer. This titration solution is comprised of three parts: This help provides instructions on using EasyCare Tx 2 software with a TxLink 2 device.
Tx Link provides up to six color-coded analog DC outputs (A-F), which can be used to connect the real-time streams measured by the ResMed therapy device to a PSG system.
Once you’ve set the Windows environment, you’ll need to configure your new Tx Link with an IP address. Using only the power supply and a USB-to-Serial cable, connect the Tx Link to your PC.
PSG connections TxLink 2 provides up to six analog DC outputs (A-F), which can be used to transmit the real-time streams measured by the ResMed therapy device to a PSG system. To support many different types of PSG systems, each DC output is available at three connection points. Each mono jack connector provides one channel only.
All primary windows in the application are dockable (at least 2 windows must be open, e.g. ‘Map’ / ’Driver follow-up’). This means you can position them in the area on your screen that suits you most.
The TxLink 2 is intended to provide connectivity between the ResMed EasyCare Tx 2 software and ResMed continuous positive airway pressure (CPAP), b ilevel, or non-invasive ventilator devices that incorporate ResMed’s proprietary communication protocol.
