Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. voelpker.com › broschueren › voelpker_broschuere_polish_car_2020_webWAX ADDITIVES FOR CAR CARE - VOELPKER

    Wax additives for car care applications Table 1: Chemical nature, physical data and typical car care applications of VOELPKER® wax additives Other functional raw materials

  2. CONSUMER CAR WASH CONCENTRATE (No.1109) Instructions for Use: Dilute 1 ounce concentrate to 1 gallon of water (1:128). Mix and apply using a sponge. Rinse and dry the car surface. Ingredients: Deionized Water BIO-SOFT® D-40 AMMONYX® LMDO Sodium Chloride Dye, Fragrance & Preservative % by Weight q.s. to 100.00 20.00 10.00 0.25 q.s. Functionality

  3. Cola®Dry DAB is a great wax additive to be added into drying agent formulas to improve dry-ing, shine, and protection of vehicle surface in clear coat pro-tectants, sealer wax, tricolor wax, total body protectants, as well as “hot lava waxes” that have become popular. Cola®Dry DAB is also useful in applications such as wash-n-shine, water-

  4. Below is a simple chart which describes the differences and benefits of each. Micronized • Typically Dv50 ranges from 5-9 microns • High efficiency (100% active) • Most effective matting option • Broadest compatibility • Most cost effective solution Dispersion • Small particle size Dv50 ranges from 2-6 microns • Wide range of ...

  5. 3 Ιουν 2023 · Car wash soaps can be formulated as powders or liquids. Powders are a mixture of builders like phosphates, carbonates, silicates, etc. blended in a ribbon blender, and surfactants like dodecyl benzenesulfonic acid (DDBSA) and nonylphenol ethoxylate 9EO (NP-9) adsorbed onto the powder.

  6. Softer waxes, such as paraffin and beeswax, tend to be better at lubricating, providing better application in terms of rubout ease and improved spreading. However, soft waxes provide less shine to the system. In most formulations, it is best to blend a hard wax with a soft wax to optimize their benefits in the formulation.

  7. Add ingredients 7-9 to the main vessel, heating to 70°C with low shear. 3. Slowly add ingredient 10 and stir until dispersed. 4. Add Phase A and Phase B with high shear. 5. Cool to ambient temperature. Open the catalog to page 1.

  1. Γίνεται επίσης αναζήτηση για