Αποτελέσματα Αναζήτησης
Press and release the C/F (Celsius/Fahrenheit) button to toggle between temperature scales. Press and release the Pulse Timer/Monitor Mode button to activate the timer. Audible beeps sound at 0, 15, 30, 45, and 60 seconds. The timer turns off automatically after 60 seconds.
This manual describes maintenance and troubleshooting procedures for the SureTemp ® Plus Model 690 and 692 Thermometers. Most topics and procedures described in this manual are
This manual describes maintenance and troubleshooting procedures for the SureTemp ®
Calibrate the Sensor: Regularly calibrate your temperature sensor to ensure accurate readings. Follow manufacturer guidelines for calibration procedures. Check for Sensor Drift: Monitor the sensor’s behavior over time.
Compare the thermometer’s temperature reading to the 9600 Plus’ calibration set point temperature. If the temperatures are within + 0.1ºC (+ 0.2ºF), the thermometer is within calibration. Page 23: Troubleshooting
Read these instructions thoroughly before using the instrument, and then store these instructions in a safe place for future reference. The Welch Allyn SureTemp Plus is a portable thermistor thermometer used for accurately measuring body temperatures at oral, axillary, or rectal sites.
If the unit is equipped with a Digi-Controller and the display is showing H, the interior temp of the unit is too high to allow the Espar unit to operate. If the display is showing L, the unit will work but the temp is too cold to show the correct temp on the display.
