Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. 6 Ιαν 2023 · It’s also not unusual for these older Civic Hybrids to need a new hybrid battery at around 100,000 miles. Owners of older Civic Hybrids often complained of the following issues; IMA and check engine light comes on; Hybrid battery quickly loses charge; Reduced power/acceleration; Poor gas mileage

  2. 16 Δεκ 2018 · To check the status of the IMA battery, you can go to the dealer, who will give something like this: Or buy a HDS scanner (or HIM) to connect it to a laptop and use the Honda Diagnostic System program to find out the voltage on each module and many more different parameters.

  3. 21 Φεβ 2022 · What Does It Mean When The IMA Light Comes On? If your Honda Civic hybrids IMA light turns on, then this doesn’t mean that the car is going to break down necessarily, but it does mean that you should take it to a service center to have your hybrid system looked at – never ignore it.

  4. 11 Σεπ 2015 · Get your VIN number off the car and call your local Honda Stealership and tell them you want your battery pack changed under warranty. If your car has turned on the IMA light then the pack is bad and will be replaced under warranty more than likely. Ours turned on the IMA and Check Engine light.

  5. Dealing with excessive oil consumption in the 2008–2011 Honda Civic Hybrids can be a challenge for many owners. This issue may result from a variety of factors, including mechanical wear, driving habits, or even design issues with the vehicle. Here’s a detailed guide to help you address this problem: Identify the Symptoms

  6. I moved this video over from my other channel, as YouTube somehow blurred over half the video. This video is specifically on how to fix the IMA battery on a ...

  7. www.motor.com › magazine-summary › civic-hybrid-maintenance-service-opportunitiesDealing With Oil Consumption Issues | MOTOR

    According to Honda, a 2003 Civic Hybrid may set DTC P1021 (Valve Pause System Stuck On) on the first restart after an oil change. That's because the ECM is detecting low oil pressure in the valve train.