Αποτελέσματα Αναζήτησης
4 Οκτ 2023 · Run the following command to restart a remote computer with Powershell even when it is in use. Restart-Computer -ComputerName REMOTE_COMPUTER_NAME -Force; Replace REMOTE_COMPUTER_NAME with the name of the computer to restart and press enter.
3 Απρ 2023 · To RESTART A REMOTE COMPUTER FROM COMMAND PROMPT, give this command: shutdown /m \\COMPUTER /r * Note: Replace the word "COMPUTER ", with the Name or the IP Address of the remote pc that you want to restart or shutdown. e.g: to remote restart a remote pc with name "Desktop10" and IP "192.168.1.100", issue one of the following commands:
31 Μαΐ 2024 · Shutdown or Restart Remote Computer Command Line Examples. Let’s get on COMPUTERA and attempt to restart and shutdown COMPUTERB using the command line in an elevated command prompt (run as admin). Restart Remote Computer shutdown /r /m \\COMPUTERB Restart Remote Computer with Message shutdown /r /m \\COMPUTERB /c “Your computer is about to ...
8 Νοε 2024 · You can reboot a remote computer from the Windows Command Prompt, using the shutdown utility. Enter shutdown /r /m \[IP Address] at the command line but put the IP address of the computer that you want to shut down instead of [IP Address].
1 Απρ 2018 · Windows systems have a built in shutdown command that can be used to restart or shutdown local and remote computers. The command is shutdown. To use this command just open the windows command prompt and type shutdown.
30 Μαρ 2014 · Here are four of my favorite methods to do this: 1. The shutdown command. This is a command line tool available on most any windows computer which will allow you to remotely reboot any computer joined to an active directory domain. All that’s required are the right credentials. shutdown -r — reboots the system.
30 Ιουν 2023 · To restart a remote computer named PC2, use the following command: shutdown /r /m \\pc2. This command will prompt the remote computer to restart after approximately one minute. If you want to display a custom message to the logged-on users before restarting, you can add the /c command:
