Αποτελέσματα Αναζήτησης
WLED 0.15.0-b1 is major new step since the introduction of 2D and audioreactive features to WLED. This version's highlights are: UI refinements, performance tweaks and included simplified mode
Plug in your ESP to a USB port. We will install WLED 0.12.0 to it. Hit "Install" and select the correct COM port. No device found? Get WLED installed and connected in less than 3 minutes!
You can download the latest version here. Need help with installation? Here is a guide that will help you. Alternatively you can build the app by yourself. You can find a guide for this here.
Welcome to my project WLED! A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!
If running Windows, you need a driver from here: https://www.wemos.cc/en/latest/ch340_driver.html before your computer will show the COM port in ESPhome Flasher. With a Wemos D1 mini you do not need to hold down the reset button while flashing.
16 Αυγ 2021 · WLED is an awesome open source application created to control addressable LEDs (WS2811, WS2812b, WS2813, etc) from your iOS or Android smartphone, or literally any device which can send a command via http/https over a network!
Settings page - configuration over network. Access Point and station mode - automatic failsafe AP. Up to 3 LED outputs per ESP8266 instance and 10 LED outputs per ESP32 instance. Support for RGBW strips. Up to 250 user presets to save and load colors/effects easily, supports cycling through them.
