Αποτελέσματα Αναζήτησης
• For more working time and easier clean up, pre-seal natural stone, porous or rough tile with Aqua Mix ® Grout Release. • Fusion Pro cures by evaporation.
24 Ιουν 2015 · I'm using Fusion Pro on a job now. I put 2 drops of Dawn dish detergent in a 32 oz. spray bottle. Then I lightly mist the area (about 10sqft) I'm doing before grouting. It seemed to spread and clean easier. I have more to do but I thought maybe some of you guys would like to try it and comment.
Fusion Pro® ®Single Component Grout is a unique, patented, ready-to-use formula. It is not a cement, epoxy or urethane-based grout, so installing Fusion Pro is different from the process used with traditional grouts. Most importantly, Fusion Pro is spread and then cleaned immediately. Depending on the tile type,
15 Απρ 2017 · The contractor didn't seal the grout, as he explained, Fusion Pro doesn't require sealing. I bought the Construction Products recommended grout cleaner, Aqua Mix, but even that won't get it clean. Any advice would be greatly appreciated.
final clean up. Do not allow Fusion Pro to dry or skin over prior to final cleaning. If grout dries on the surface, lightly moisten and wait 2-4 minutes, then gently clean the tile surface using a sponge (or a white nylon scrubber) to remove residue. If streaks or residue remain after 2 hours, use diluted Aqua Mix® Grout Haze Clean-Up,
9 Μαρ 2024 · How do you remove grout haze from Fusion Pro? Work carefully to minimize haze during application by wiping tiles diagonally while the grout is still fresh. Change cleaning water frequently. If slight haze remains after 72 hours, use an acidic grout haze remover paired with scrub pads.
