Αποτελέσματα Αναζήτησης
The following steps are a guide to build a simple mousetrap car. 2 pieces of Cardboard (4” x 10”) many dimensions will work, but this is a good starting place. Step 1 – Cut a rectangular notch (about 1” x 2 “) on the short side of each piece of cardboard so that the notches overlap (Figure 2).
A Mousetrap Car is powered by the energy of the mouse trap’s spring. We can take advantage of the potential energy stored when the spring is wound up to propel our cars, converting it into kinetic energy.
26 Απρ 2006 · To use a mouse trap to power your vehicle, attach a string to the arm of the trap and wind the other end around the axel of your wheels. Experiment with size and length of all parts of your vehicle.
Design and build a car that runs on energy provided by a mousetrap! Use a prototype mousetrap car to test different variables and then modify the design of the car to optimize its performance.
Students devise an experiment to determine the velocity of their mouse trap cars a. Teacher should oversee their procedures to determine if they are sufficient to collect data
A mousetrap-powered racer is a vehicle that is powered by the energy of a wound up mousetrap s spring. The most basic design is as follows: one end of a string is tied to the tip of a lever arm that is attached to the mousetrap s snapper arm.
Introduction: You will build an originally designed vehicle powered solely by the energy of one standard-sized mousetrap. A very popular method of propulsion is to tie one end of a string to the arm (or an extended lever arm) on the mousetrap and the other end to the axle.
